PartsTable
Technical Data Sheet
Download PDF

196B7771 — PIN,STRAIGHT,THREADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

196B7771: PIN,STRAIGHT,THREADED.

The PIN,STRAIGHT,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 2A2A, thread_length: 0.700 INCHES NOMINAL0.700 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFEREDCHAMFERED, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-074-0380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196B7771
NSN: 5315-01-074-0380
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class2A2A
thread_length0.700 INCHES NOMINAL0.700 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFEREDCHAMFERED
hardness_rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
pin_grip_length1.467 INCHES NOMINAL IN
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentPHOSPHATE OVERALL
first_end_locationUNTHREADED END
pin_overall_length2.570 INCHES MINIMUM AND 2.570 INCHES MINIMUM AND 2.610 INCHES MAXIMUM2.610 INCHES MAXIMUM IN
first_hole_diameter0.095 INCHES MINIMUM AND 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM0.097 INCHES MAXIMUM IN
NSN5315-01-074-0380
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 196B7771 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.020 INCHES MINIMUM AND 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
•
FIRST END LOCATION: UNTHREADED END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171,5.3.1.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLEDONE END DRILLED
•
THREAD LENGTH: 0.700 INCHES NOMINAL0.700 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFEREDCHAMFERED
•
FIRST HOLE DIAMETER: 0.095 INCHES MINIMUM AND 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM0.097 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.020 INCHES MINIMUM AND 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN
FIRST END LOCATIONUNTHREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171,5.3.1.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLEDONE END DRILLED
THREAD LENGTH0.700 INCHES NOMINAL0.700 INCHES NOMINAL IN
FIRST END STYLECHAMFEREDCHAMFERED
FIRST HOLE DIAMETER0.095 INCHES MINIMUM AND 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM0.097 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A322,HOT ROLLED ASSN STD 1ST MATERIAL RESPONSE OR ASTM-A331,COLD FINISHED,4130 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 196B7771?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196B7771?
196B7771 is a PIN,STRAIGHT,THREADED.
What is the NSN for 196B7771?
196B7771 is cataloged in the U.S. Government catalog under NSN 5315-01-074-0380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196B7771

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.