PartsTable
Technical Data Sheet
Download PDF

19675 — BEARING THRUST

✓ Government record, cited
Jumbo · NUT WASHER
PRODUCT OVERVIEW

19675: BEARING THRUST.

The BEARING THRUST is a Jumbo industrial component. Key specifications include special_features: WASHER FOR SNATCH BLOCK 19678-1, end_item_identification: 9515-01-563-0360, part_name_assigned_by_controlling_agency: DRUM LIFT AD. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-102-0329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19675
NSN: 5310-01-102-0329
NIINs: 011020329, 011815916, 015780383
FSC: 5310 — Nuts and Washers
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
special_featuresWASHER FOR SNATCH BLOCK 19678-1
end_item_identification9515-01-563-0360
part_name_assigned_by_controlling_agencyDRUM LIFT AD
NSN5310-01-102-0329
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 19675 · Jumbo ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1045 OR STEEL COMP 1141 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1045 OR STEEL COMP 1141 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
THICKNESS0.228 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
96-81002Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 19675?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19675?
19675 is a BEARING THRUST manufactured by Jumbo.
What parts can replace 19675?
There is 1 known substitute for 19675: 96-81002. Substitute compatibility should be verified for your specific system.
What is the NSN for 19675?
19675 is cataloged in the U.S. Government catalog under NSN 5310-01-102-0329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19675

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.