PartsTable
Technical Data Sheet
Download PDF

1965472 — INSULATOR,BUSHING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1965472: INSULATOR,BUSHING.

The INSULATOR,BUSHING is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALLPLASTIC OVERALL, shank_height: 0.220 INCHES NOMINAL0.220 INCHES NOMINAL IN, overall_height: 0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN, hardness_rating: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL, inside_diameter: 0.516 INCHES NOMINAL0.516 INCHES NOMINAL IN, outside_diameter: 1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-445-2984, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1965472
NSN: 5330-00-445-2984
NIINs: 004452984, 006578133
FSC: 5330 — Packing and Gasket Materials
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialPLASTIC OVERALLPLASTIC OVERALL
shank_height0.220 INCHES NOMINAL0.220 INCHES NOMINAL IN
overall_height0.405 INCHES NOMINAL0.405 INCHES NOMINAL IN
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
inside_diameter0.516 INCHES NOMINAL0.516 INCHES NOMINAL IN
outside_diameter1.060 INCHES NOMINAL1.060 INCHES NOMINAL IN
style_designatorSHOULDERSHOULDER
width_across_flats0.689 INCHES NOMINAL0.689 INCHES NOMINAL IN
shank_outside_diameter0.814 INCHES NOMINAL0.814 INCHES NOMINAL IN
cross-sectional_thickness0.120 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
gasket_center_to_flat_distance0.344 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
NSN5330-00-445-2984
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1965472 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
GASKET CENTER TO FLAT DISTANCE: 0.344 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.804 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
GASKET CENTER TO SECOND FLAT DISTANCE: 0.344 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
GASKET CENTER TO FLAT DISTANCE0.344 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.804 INCHES MINIMUM AND 0.814 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
GASKET CENTER TO SECOND FLAT DISTANCE0.344 INCHES MINIMUM AND 0.345 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
1945469Reference document
Same NSN cross-reference
Reference document — Secondary reference
125-3695Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7748644Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1965472?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1965472?
1965472 is a INSULATOR,BUSHING.
What parts can replace 1965472?
There are 3 known substitutes for 1965472: 1945469, 125-3695, 7748644. Substitute compatibility should be verified for your specific system.
What is the NSN for 1965472?
1965472 is cataloged in the U.S. Government catalog under NSN 5330-00-445-2984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1965472

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.