PartsTable
Technical Data Sheet
Download PDF

196192-1 — BUSHING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

196192-1: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, flange_width: 0.1500 INCHES NOMINAL IN, overall_length: 0.3750 INCHES NOMINAL IN, body_inside_diameter: 0.7525 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM IN, body_outside_diameter: 1.3150 INCHES MINIMUM AND 1.3155 INCHES MAXIMUM IN, flange_outside_diameter: 1.6250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-808-5122, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196192-1
NSN: 5340-00-808-5122
NIINs: 008085122, 012461071
FSC: 5340 — Hardware, Commercial
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
flange_width0.1500 INCHES NOMINAL IN
overall_length0.3750 INCHES NOMINAL IN
body_inside_diameter0.7525 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM IN
body_outside_diameter1.3150 INCHES MINIMUM AND 1.3155 INCHES MAXIMUM IN
flange_outside_diameter1.6250 INCHES NOMINAL IN
NSN5340-00-808-5122
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 196192-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.734 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.734 INCHES MAXIMUM IN
MATERIALPLASTIC
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 5
PC814500000F1Reference document
Same NSN cross-reference
Reference document — Secondary reference
99-943-1099Reference document
Same NSN cross-reference
Reference document — Informative reference only
833929-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
99-458-1845Reference document
Same NSN cross-reference
Reference document — Informative reference only
025-0459-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 196192-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196192-1?
196192-1 is a BUSHING,SLEEVE.
What parts can replace 196192-1?
There are 5 known substitutes for 196192-1: PC814500000F1, 99-943-1099, 833929-00 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 196192-1?
196192-1 is cataloged in the U.S. Government catalog under NSN 5340-00-808-5122. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196192-1