PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 196-0126-002
196-0126-002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER SYNTHETIC, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, style_designator: DONUT TOP COUNTERBORED, first_counterbore_depth: 0.156 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-663-9941, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196-0126-002
NSN: 5340-00-663-9941
FSC: 5340
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER SYNTHETIC
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
style_designatorDONUT TOP COUNTERBORED
first_counterbore_depth0.156 INCHES NOMINAL IN
first_counterbore_diameter0.281 INCHES NOMINAL IN
outside/top_flange_diameter0.750 INCHES NOMINAL IN
NSN5340-00-663-9941
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 196-0126-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DONUT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.156 INCHES NOMINAL IN
•
COLOR: BLACK
•
FIRST COUNTERBORE DIAMETER: 0.281 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.125 INCHES NOMINAL IN
STYLE DESIGNATORDONUT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.156 INCHES NOMINAL IN
COLORBLACK
FIRST COUNTERBORE DIAMETER0.281 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
OVERALL HEIGHT0.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
2194Upgraded Successor
successor cross-reference
successor
R145Upgraded Successor
successor cross-reference
successor
5310-032-1959Interchangeable
interchangeable cross-reference
interchangeable
77-0923-6PC23Interchangeable
interchangeable cross-reference
interchangeable
K837884-3Interchangeable
interchangeable cross-reference
interchangeable
1644AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 196-0126-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196-0126-002?
196-0126-002 is a BUMPER.
What parts can replace 196-0126-002?
There are 19 known substitutes for 196-0126-002: 2194, R145, 5310-032-1959 and 16 more. Substitute compatibility should be verified for your specific system.
Is 196-0126-002 still available?
196-0126-002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196-0126-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026