PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 196-0091-001
196-0091-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.312 INCHES NOMINAL IN, style_designator: PAN TOP COUNTERBORED, first_counterbore_depth: 0.781 INCHES NOMINAL IN, material_hardness_rating: 60.0 DUROMETER NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-861-0798, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196-0091-001
NSN: 5340-00-861-0798
FSC: 5340
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
style_designatorPAN TOP COUNTERBORED
first_counterbore_depth0.781 INCHES NOMINAL IN
material_hardness_rating60.0 DUROMETER NOMINAL
first_counterbore_diameter0.250 INCHES NOMINAL IN
outside/top_flange_diameter0.625 INCHES NOMINAL IN
NSN5340-00-861-0798
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 196-0091-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
FIRST COUNTERBORE DEPTH: 0.781 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PAN TOP COUNTERBORED
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 60.0 DUROMETER NOMINAL
•
FIRST COUNTERBORE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
FIRST COUNTERBORE DEPTH0.781 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.312 INCHES NOMINAL IN
STYLE DESIGNATORPAN TOP COUNTERBORED
HOLE DIAMETER0.156 INCHES NOMINAL IN
MATERIAL HARDNESS RATING60.0 DUROMETER NOMINAL
FIRST COUNTERBORE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
4460Upgraded Successor
successor cross-reference
successor
240TInterchangeable
interchangeable cross-reference
interchangeable
AAA-S-115Interchangeable
interchangeable cross-reference
interchangeable
B2106740Interchangeable
interchangeable cross-reference
interchangeable
13538Interchangeable
interchangeable cross-reference
interchangeable
480114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 196-0091-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196-0091-001?
196-0091-001 is a BUMPER.
What parts can replace 196-0091-001?
There are 14 known substitutes for 196-0091-001: 4460, 240T, AAA-S-115 and 11 more. Substitute compatibility should be verified for your specific system.
Is 196-0091-001 still available?
196-0091-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196-0091-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026