PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 196-0031-001
196-0031-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, overall_height: 0.313 INCHES NOMINAL IN, groove_diameter: 0.188 INCHES NOMINAL IN, style_designator: DOUBLE FLANGE, top_flange_width: 0.188 INCHES NOMINAL IN, bottom_flange_width: 0.163 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-8806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
196-0031-001
NSN: 5340-00-598-8806
FSC: 5340
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
overall_height0.313 INCHES NOMINAL IN
groove_diameter0.188 INCHES NOMINAL IN
style_designatorDOUBLE FLANGE
top_flange_width0.188 INCHES NOMINAL IN
bottom_flange_width0.163 INCHES NOMINAL IN
bottom_flange_diameter0.250 INCHES NOMINAL IN
outside/top_flange_diameter0.375 INCHES NOMINAL IN
NSN5340-00-598-8806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 196-0031-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: DOUBLE FLANGE
•
GROOVE DIAMETER: 0.188 INCHES NOMINAL IN
•
BOTTOM FLANGE WIDTH: 0.163 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE/TOP FLANGE DIAMETER: 0.375 INCHES NOMINAL IN
•
BOTTOM FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
TOP FLANGE WIDTH: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORDOUBLE FLANGE
GROOVE DIAMETER0.188 INCHES NOMINAL IN
BOTTOM FLANGE WIDTH0.163 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
OUTSIDE/TOP FLANGE DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.313 INCHES NOMINAL IN
BOTTOM FLANGE DIAMETER0.250 INCHES NOMINAL IN
TOP FLANGE WIDTH0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2920137-9Interchangeable
interchangeable cross-reference
interchangeable
940-9Interchangeable
interchangeable cross-reference
interchangeable
F12675-9Interchangeable
interchangeable cross-reference
interchangeable
700371Interchangeable
interchangeable cross-reference
interchangeable
7409Interchangeable
interchangeable cross-reference
interchangeable
799252Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 196-0031-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 196-0031-001?
196-0031-001 is a BUMPER.
What parts can replace 196-0031-001?
There are 13 known substitutes for 196-0031-001: 2920137-9, 940-9, F12675-9 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 196-0031-001?
196-0031-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-8806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 196-0031-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026