PartsTable
Technical Data Sheet
PartsTable / O-RING / 195732
195732 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: AIRCRAFT ENGINE AE2100D3, KC130J, criticality_code_justification: AGAV. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-497-4144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
195732
NSN: 5331-01-497-4144
FSC: 5331 — O-RING
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identificationAIRCRAFT ENGINE AE2100D3, KC130J
criticality_code_justificationAGAV
material_document_and_classificationSAE AMS7276 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency(INAVY) PACKING,AIRCRAFT,MA
NSN5331-01-497-4144
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 195732 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE AMS7276 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCY(INAVY) PACKING,AIRCRAFT,MA
CRITICALITY CODE JUSTIFICATIONAGAV
MATERIAL DOCUMENT AND CLASSIFICATIONSAE AMS7276 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
END ITEM IDENTIFICATIONAIRCRAFT ENGINE AE2100D3, KC130J
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS3209-115Interchangeable
interchangeable cross-reference
interchangeable
946.91.27.760Interchangeable
interchangeable cross-reference
interchangeable
10361280Interchangeable
interchangeable cross-reference
interchangeable
AS3085-115Interchangeable
interchangeable cross-reference
interchangeable
2-115 V747-75Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 195732?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 195732?
195732 is a O-RING.
What parts can replace 195732?
There are 8 known substitutes for 195732: AS3209-115, 946.91.27.760, 10361280 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 195732?
195732 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-497-4144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 195732

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026