PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 195675M1
195675M1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1542 INCHES NOMINAL IN, bore_diameter: 2.2500 INCHES NOMINAL IN, special_features: 0.135 IN. MIN TO 0.150 IN,MAX FRONT FACE CORNER RADIUS IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0930 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-843-2192, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
195675M1
NSN: 3110-00-843-2192
FSC: 3110
CAGE: 14398 — MASSEY-FERGUSON INC GEAR AND SHAFT PLANT DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1542 INCHES NOMINAL IN
bore_diameter2.2500 INCHES NOMINAL IN
special_features0.135 IN. MIN TO 0.150 IN,MAX FRONT FACE CORNER RADIUS IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0930 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 4
NSN3110-00-843-2192
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 195675M1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
•
CONE WIDTH: 1.1542 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 2.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0930 INCHES NOMINAL IN
CONE WIDTH1.1542 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER2.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
SPECIAL FEATURES0.135 IN. MIN TO 0.150 IN,MAX FRONT FACE CORNER RADIUS IN
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
461A-H62Interchangeable
interchangeable cross-reference
interchangeable
462AInterchangeable
interchangeable cross-reference
interchangeable
G0-12FRN20Interchangeable
interchangeable cross-reference
interchangeable
96856-101Interchangeable
interchangeable cross-reference
interchangeable
460AInterchangeable
interchangeable cross-reference
interchangeable
260Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 195675M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 195675M1?
195675M1 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 195675M1?
There are 9 known substitutes for 195675M1: 461A-H62, 462A, G0-12FRN20 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 195675M1?
195675M1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-843-2192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 195675M1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026