PartsTable / COMPONENT / 19556
19556
✓ Verified by PartsTable
Jumbo · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Learn everything about colors and shapes, the letters of the alphabet, and counting from 1 to 5 with the help of the 20 games. Play alone or together. The games increase in difficulty and are self - correcting This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-4585, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
19556
NSN: 5330-00-297-4585 FSC: 5330 CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
bearings NOT INCLUDED material PLASTIC CASE bore_type STRAIGHT face_width 0.750 INCHES NOMINAL IN plate_type NEGATIVE AND POSITIVE bore_length 0.812 INCHES NOMINAL IN design_form WEBBED bore_feature INCLUDED groove_depth 0.375 INCHES NOMINAL IN groove_shape U groove_width 0.406 INCHES NOMINAL IN bore_diameter 0.500 INCHES NOMINAL IN NSN 5330-00-297-4585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 19556
MFR: Jumbo
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 4.453 INCHES NOMINAL IN
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OR N 33+22B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
• APERTURE DIAMETER: 3.938 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.062 INCHES NOMINAL IN OUTSIDE DIAMETER 4.453 INCHES NOMINAL IN STYLE DESIGNATOR CIRCULAR MATERIAL DOCUMENT AND CLASSIFICATION HH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OR N 33+22B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL MATERIAL PAPER OVERALL APERTURE DIAMETER 3.938 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
19556 Interchangeable interchangeable cross-reference
interchangeable
4231 Interchangeable interchangeable cross-reference
interchangeable
24941-005 Interchangeable interchangeable cross-reference
interchangeable
15M220 Interchangeable interchangeable cross-reference
interchangeable
018980-000 Interchangeable interchangeable cross-reference
interchangeable
7744488 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 19556?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19556?
19556 is a BATTERY,STORAGE manufactured by Jumbo.
What parts can replace 19556?
There are 6 known substitutes for 19556: 19556, 4231, 24941-005 and 3 more. Substitute compatibility should be verified for your specific system.
Is 19556 still available?
19556 is currently cancelled.