PartsTable
Technical Data Sheet
Download PDF

1953M70P001A — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1953M70P001A: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 159.0 DEGREES MINIMUM AND 161.0 DEGREES MAXIMUM, style_designator: ANGLE, first_leg_thickness: 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, second_leg_thickness: 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, first_leg_hole_diameter: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-428-5917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1953M70P001A
NSN: 5340-01-428-5917
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle159.0 DEGREES MINIMUM AND 161.0 DEGREES MAXIMUM
style_designatorANGLE
first_leg_thickness0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
second_leg_thickness0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
first_leg_hole_diameter0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
second_leg_hole_diameter0.213 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleONE HOLE
second_leg_hole_arrangement_styleTWO HOLES
second_leg_relationship_to_first_legNOT IDENTICAL
second_leg_distance_between_hole_centers_along_width2.774 INCHES NOMINAL IN
NSN5340-01-428-5917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1953M70P001A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 159.0 DEGREES MINIMUM AND 161.0 DEGREES MAXIMUM
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.213 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG THICKNESS: 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
FIRST LEG ANGLE159.0 DEGREES MINIMUM AND 161.0 DEGREES MAXIMUM
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.213 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 6061
SECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 1953M70P001A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1953M70P001A?
1953M70P001A is a BRACKET,ANGLE.
What is the NSN for 1953M70P001A?
1953M70P001A is cataloged in the U.S. Government catalog under NSN 5340-01-428-5917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1953M70P001A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.