PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 195109
195109 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.122 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, hole_diameter: 0.812 INCHES NOMINAL IN, overall_diameter: 2.000 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-055-6988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
195109
NSN: 5340-00-055-6988
FSC: 5340
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.122 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
hole_diameter0.812 INCHES NOMINAL IN
overall_diameter2.000 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE
NSN5340-00-055-6988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 195109 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: RECTANGLE, NO HOLES
•
LENGTH: 0.531 INCHES NOMINAL IN
•
WIDTH: 4.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLERECTANGLE, NO HOLES
LENGTH0.531 INCHES NOMINAL IN
END ITEM IDENTIFICATIONMODEL28,TELETYPEWRITER SET
WIDTH4.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
195-109Interchangeable
interchangeable cross-reference
interchangeable
95-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 195109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 195109?
195109 is a COVER,ACCESS.
What parts can replace 195109?
There are 2 known substitutes for 195109: 195-109, 95-12. Substitute compatibility should be verified for your specific system.
What is the NSN for 195109?
195109 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-055-6988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 195109

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026