PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1950569
1950569 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 60.0 DEGREES NOMINAL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, center_hole_diameter: 0.635 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, cross-sectional_height: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-104-9486, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1950569
NSN: 5330-00-104-9486
FSC: 5330
CAGE: 16764 — GENERAL MOTORS CORP DELCO REMY DIV (USA)
SPECIFICATIONS
angle60.0 DEGREES NOMINAL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
center_hole_diameter0.635 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
cross-sectional_height0.060 INCHES NOMINAL IN
NSN5330-00-104-9486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1950569 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
ANGLE: 60.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.635 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
ANGLE60.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.245 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.635 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
150 10MMInterchangeable
interchangeable cross-reference
interchangeable
1333-10.0MMInterchangeable
interchangeable cross-reference
interchangeable
47343Interchangeable
interchangeable cross-reference
interchangeable
4058879Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1950569?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1950569?
1950569 is a RETAINER,PACKING.
What parts can replace 1950569?
There are 4 known substitutes for 1950569: 150 10MM, 1333-10.0MM, 47343 and 1 more. Substitute compatibility should be verified for your specific system.
Is 1950569 still available?
1950569 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1950569

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026