PartsTable
Technical Data Sheet
Download PDF

195-0022-001 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

195-0022-001: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL, overall_length: 4.375 INCHES NOMINAL IN, handle_clearance: 1.500 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-027-0626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
195-0022-001
NSN: 5340-00-027-0626
FSC: 5340 — Hardware, Commercial
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL
overall_length4.375 INCHES NOMINAL IN
handle_clearance1.500 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity1
material_document_and_classificationQQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OVERALL
NSN5340-00-027-0626
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 195-0022-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY1
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.375 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE1.500 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OVERALL
THREAD SERIES DESIGNATORUNF
SUBSTITUTES & CROSS-REFERENCES 6
5427Reference document
Same NSN cross-reference
Reference document — Secondary reference
212-36-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
10541-A-1032Reference document
Same NSN cross-reference
Reference document — Secondary reference
10541A1032-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10973835Reference document
Same NSN cross-reference
Reference document — Secondary reference
415-1270-01-14-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 195-0022-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 195-0022-001?
195-0022-001 is a HANDLE,BOW.
What parts can replace 195-0022-001?
There are 6 known substitutes for 195-0022-001: 5427, 212-36-2, 10541-A-1032 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 195-0022-001?
195-0022-001 is cataloged in the U.S. Government catalog under NSN 5340-00-027-0626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 195-0022-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.