19412201 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

19412201: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: GREASE LUBRICATION, bore_diameter: 11.0000 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-673-6700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

19412201

NSN: 3110-01-673-6700
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)

SPECIFICATIONS

material	GREASE LUBRICATION
bore_diameter	11.0000 INCHES NOMINAL IN
overall_width	0.5000 INCHES NOMINAL IN
load_direction	ANGULAR
surface_finish	GROUND
special_features	EACH BEARING PAIR SHALL BE MARKED WITH A V ACROSS THE BORES AND OUTSIDE DIAMETERS TO INDICATE THE RELATIVE POSITION OF EACH ADJACENT RACE AT INSTALLATION
style_designator	NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING
bearing_preload_rating	80.0 POUNDS MINIMUM AND 120.0 POUNDS MAXIMUM LBS
end_item_identification	NSN:5855-01-564-5450;FORWARD LOOKING INFRERED IMAGING SYSTEM
overall_outside_diameter	11.5000 INCHES NOMINAL IN
retainer_fabrication_method	MOLDED
part_name_assigned_by_controlling_agency	BEARING,BALL,ANNULAR,ANGULAR CONTACT-DUPLEX PAIR
NSN	3110-01-673-6700

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MOLDED

•

BEARING PRELOAD RATING: 80.0 POUNDS MINIMUM AND 120.0 POUNDS MAXIMUM LBS

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING

•

OVERALL OUTSIDE DIAMETER: 11.5000 INCHES NOMINAL IN

•

LOAD DIRECTION: ANGULAR

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MOLDED
BEARING PRELOAD RATING	80.0 POUNDS MINIMUM AND 120.0 POUNDS MAXIMUM LBS
SURFACE FINISH	GROUND
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH	0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	11.5000 INCHES NOMINAL IN
LOAD DIRECTION	ANGULAR
SPECIAL FEATURES	EACH BEARING PAIR SHALL BE MARKED WITH A V ACROSS THE BORES AND OUTSIDE DIAMETERS TO INDICATE THE RELATIVE POSITION OF EACH ADJACENT RACE AT INSTALLATION
PART NAME ASSIGNED BY CONTROLLING AGENCY	BEARING,BALL,ANNULAR,ANGULAR CONTACT-DUPLEX PAIR
END ITEM IDENTIFICATION	NSN:5855-01-564-5450;FORWARD LOOKING INFRERED IMAGING SYSTEM

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 1

3169772-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 19412201?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 19412201?

19412201 is a BEARING,BALL,DUPLEX.

What parts can replace 19412201?

There is 1 known substitute for 19412201: 3169772-3. Substitute compatibility should be verified for your specific system.

What is the NSN for 19412201?

19412201 is cataloged in the U.S. Government catalog under NSN 3110-01-673-6700. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

19412201 — BEARING,BALL,DUPLEX

Request a Quote — 19412201