PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 194-514-9010
194-514-9010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 1.500 INCHES NOMINAL IN, open_end_inside_diameter: 6.630 INCHES NOMINAL IN, closed_end_overall_diameter: 6.770 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-531-4005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
194-514-9010
NSN: 5340-00-531-4005
FSC: 5340
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
length_under_shoulder1.500 INCHES NOMINAL IN
open_end_inside_diameter6.630 INCHES NOMINAL IN
closed_end_overall_diameter6.770 INCHES NOMINAL IN
NSN5340-00-531-4005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 194-514-9010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 6.770 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 1.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
OPEN END INSIDE DIAMETER: 6.630 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CLOSED END OVERALL DIAMETER6.770 INCHES NOMINAL IN
LENGTH UNDER SHOULDER1.500 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
OPEN END INSIDE DIAMETER6.630 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
36861Upgraded Successor
successor cross-reference
successor
11-07Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 194-514-9010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 194-514-9010?
194-514-9010 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 194-514-9010?
There are 2 known substitutes for 194-514-9010: 36861, 11-07. Substitute compatibility should be verified for your specific system.
What is the NSN for 194-514-9010?
194-514-9010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-531-4005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 194-514-9010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026