PartsTable
Technical Data Sheet
194-513-9019 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), design_type: FRICTION, inside_diameter_length: 0.625 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.688 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-054-1483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
194-513-9019
NSN: 5340-01-054-1483
FSC: 5340
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
design_typeFRICTION
inside_diameter_length0.625 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.688 INCHES NOMINAL IN
NSN5340-01-054-1483
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 194-513-9019 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
DESIGN TYPE: FRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
DESIGN TYPEFRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
110625Upgraded Successor
successor cross-reference
successor
0257614AInterchangeable
interchangeable cross-reference
interchangeable
111625Interchangeable
interchangeable cross-reference
interchangeable
CPFR-BS-240-33Interchangeable
interchangeable cross-reference
interchangeable
WEM UPFR-BS-240-33Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 194-513-9019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 194-513-9019?
194-513-9019 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 194-513-9019?
There are 5 known substitutes for 194-513-9019: 110625, 0257614A, 111625 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 194-513-9019?
194-513-9019 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-054-1483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 194-513-9019