PartsTable
Technical Data Sheet
194-513-9001 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), design_type: FRICTION, overall_diameter: 0.229 INCHES NOMINAL IN, special_features: COLOR YELLOW, inside_diameter_length: 0.625 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-820-4958, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
194-513-9001
NSN: 5340-00-820-4958
FSC: 5340
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
design_typeFRICTION
overall_diameter0.229 INCHES NOMINAL IN
special_featuresCOLOR YELLOW
inside_diameter_length0.625 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed0.125 INCHES NOMINAL IN
NSN5340-00-820-4958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 194-513-9001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
DESIGN TYPE: FRICTION
OVERALL DIAMETER: 0.229 INCHES NOMINAL IN
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.125 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
DESIGN TYPEFRICTION
OVERALL DIAMETER0.229 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR YELLOW
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.125 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
201.762Upgraded Successor
successor cross-reference
successor
6515NCM104738Upgraded Successor
successor cross-reference
successor
17041Upgraded Successor
successor cross-reference
successor
106-20620Upgraded Successor
successor cross-reference
successor
20625Upgraded Successor
successor cross-reference
successor
106-20621Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 194-513-9001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 194-513-9001?
194-513-9001 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 194-513-9001?
There are 20 known substitutes for 194-513-9001: 201.762, 6515NCM104738, 17041 and 17 more. Substitute compatibility should be verified for your specific system.
Is 194-513-9001 still available?
194-513-9001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 194-513-9001