PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 194-505-9002
194-505-9002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, overall_diameter: 2.308 INCHES NOMINAL IN, inside_diameter_length: 0.344 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-916-4502, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
194-505-9002
NSN: 5340-00-916-4502
FSC: 5340
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
overall_diameter2.308 INCHES NOMINAL IN
inside_diameter_length0.344 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.500 INCHES NOMINAL IN
NSN5340-00-916-4502
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 194-505-9002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
INSIDE DIAMETER LENGTH: 0.344 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC VINYL
•
OVERALL DIAMETER: 2.308 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
INSIDE DIAMETER LENGTH0.344 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC VINYL
OVERALL DIAMETER2.308 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
76304Upgraded Successor
successor cross-reference
successor
D-8DUpgraded Successor
successor cross-reference
successor
20T8ADRYCHARGEDUpgraded Successor
successor cross-reference
successor
225-750Upgraded Successor
successor cross-reference
successor
225Upgraded Successor
successor cross-reference
successor
2255Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 194-505-9002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 194-505-9002?
194-505-9002 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 194-505-9002?
There are 10 known substitutes for 194-505-9002: 76304, D-8D, 20T8ADRYCHARGED and 7 more. Substitute compatibility should be verified for your specific system.
Is 194-505-9002 still available?
194-505-9002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 194-505-9002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026