PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 193AA1
193AA1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include plate_width: 1.750 INCHES NOMINAL IN, plate_length: 3.375 INCHES NOMINAL IN, inside_length: 3.375 INCHES NOMINAL IN, stock_diameter: 0.313 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE, handle_clearance: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-859-2928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
193AA1
NSN: 5340-00-859-2928
FSC: 5340
CAGE: 01570 — WEILAND METAL PRODUCTS CO (USA)
SPECIFICATIONS
plate_width1.750 INCHES NOMINAL IN
plate_length3.375 INCHES NOMINAL IN
inside_length3.375 INCHES NOMINAL IN
stock_diameter0.313 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance1.500 INCHES NOMINAL IN
style_designatorDELTA OPEN
mounting_plate_styleRECTANGULAR
NSN5340-00-859-2928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 193AA1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STOCK DIAMETER: 0.313 INCHES NOMINAL IN
•
PLATE LENGTH: 3.375 INCHES NOMINAL IN
•
MOUNTING PLATE STYLE: RECTANGULAR
•
PLATE WIDTH: 1.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DELTA OPEN
•
HANDLE CLEARANCE: 1.500 INCHES NOMINAL IN
•
MOUNTING METHOD: MOUNTING PLATE
•
INSIDE LENGTH: 3.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STOCK DIAMETER0.313 INCHES NOMINAL IN
PLATE LENGTH3.375 INCHES NOMINAL IN
MOUNTING PLATE STYLERECTANGULAR
PLATE WIDTH1.750 INCHES NOMINAL IN
STYLE DESIGNATORDELTA OPEN
HANDLE CLEARANCE1.500 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
INSIDE LENGTH3.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
417-2Upgraded Successor
successor cross-reference
successor
9008Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 193AA1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 193AA1?
193AA1 is a HANDLE,BAIL.
What parts can replace 193AA1?
There are 2 known substitutes for 193AA1: 417-2, 9008. Substitute compatibility should be verified for your specific system.
What is the NSN for 193AA1?
193AA1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-859-2928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 193AA1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026