PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1938376
1938376 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN, slot_width: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-793-3265, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1938376
NSN: 5340-00-793-3265
FSC: 5340
CAGE: 16764 — GENERAL MOTORS CORP DELCO REMY DIV (USA)
SPECIFICATIONS
width0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
slot_width0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
NSN5340-00-793-3265
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1938376 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SLOT WIDTH: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
WIDTH: 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SLOT WIDTH0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
WIDTH0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
71171Upgraded Successor
successor cross-reference
successor
7533-4Interchangeable
interchangeable cross-reference
interchangeable
611170Interchangeable
interchangeable cross-reference
interchangeable
MILP13218Interchangeable
interchangeable cross-reference
interchangeable
Z148RInterchangeable
interchangeable cross-reference
interchangeable
A120-043Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1938376?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1938376?
1938376 is a CLIP,SPRING TENSION.
What parts can replace 1938376?
There are 7 known substitutes for 1938376: 71171, 7533-4, 611170 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1938376?
1938376 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-793-3265. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1938376

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026