PartsTable / COMPONENT / 1937310
1937310
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, housing_bore_diameter: 1.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-761-8954, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1937310
NSN: 5330-00-761-8954 FSC: 5330 CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.250 INCHES NOMINAL IN housing_bore_diameter 1.250 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3600 FEET PER MINUTE FT NSN 5330-00-761-8954
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1937310
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.250 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 1.250 INCHES NOMINAL IN CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.250 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 0.750 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3600 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
35196 Interchangeable interchangeable cross-reference
interchangeable
44-00341 Interchangeable interchangeable cross-reference
interchangeable
131174 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1937310?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1937310?
1937310 is a SEAL,PLAIN ENCASED.
What parts can replace 1937310?
There are 3 known substitutes for 1937310: 35196, 44-00341, 131174. Substitute compatibility should be verified for your specific system.
Is 1937310 still available?
1937310 is currently cancelled.
Request a Quote — 1937310