PartsTable
Technical Data Sheet
Download PDF

1936822-1 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1936822-1: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.246 INCHES NOMINAL IN, height: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, length: 0.566 INCHES NOMINAL IN, hole_diameter: 0.100 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, furnished_items: LOCKNUT, special_features: SECOND HOLE 0.119 IN. MIN,0.124 IN.

MAX IN. This part is cataloged in the U.S. Government catalog under NSN 5340-00-152-0126, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1936822-1
NSN: 5340-00-152-0126
FSC: 5340 — Hardware, Commercial
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
width0.246 INCHES NOMINAL IN
height0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
length0.566 INCHES NOMINAL IN
hole_diameter0.100 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
special_featuresSECOND HOLE 0.119 IN. MIN,0.124 IN. MAX IN
surface_treatmentCHROMATE
NSN5340-00-152-0126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1936822-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.566 INCHES NOMINAL IN
•
HEIGHT: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CHROMATE
•
WIDTH: 0.246 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.100 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.566 INCHES NOMINAL IN
HEIGHT0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
SPECIAL FEATURESSECOND HOLE 0.119 IN. MIN,0.124 IN. MAX IN
SURFACE TREATMENTCHROMATE
WIDTH0.246 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.100 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1936822-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1936822-1?
1936822-1 is a CLAMP,SYNCHRO.
What is the NSN for 1936822-1?
1936822-1 is cataloged in the U.S. Government catalog under NSN 5340-00-152-0126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1936822-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.