PartsTable
Technical Data Sheet
Download PDF

1936137-1 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1936137-1: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OUTER RING, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.3938 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, special_features: LUBRICATE 1/4 TO 1/3 FULL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-230-0501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1936137-1
NSN: 3110-00-230-0501
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OUTER RING
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.3938 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresLUBRICATE 1/4 TO 1/3 FULL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
internal_clearance0.0007 INCHES MINIMUM AXIAL AND 0.0013 INCHES MAXIMUM AXIAL IN
bearing_preload_rating4.0 POUNDS NOMINAL LBS
overall_outside_diameter0.6250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-230-0501
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1936137-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING PRELOAD RATING: 4.0 POUNDS NOMINAL LBS
•
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM AXIAL AND 0.0013 INCHES MAXIMUM AXIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING PRELOAD RATING4.0 POUNDS NOMINAL LBS
INTERNAL CLEARANCE0.0007 INCHES MINIMUM AXIAL AND 0.0013 INCHES MAXIMUM AXIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH0.3938 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1936137-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1936137-1?
1936137-1 is a BEARING,BALL,DUPLEX.
What is the NSN for 1936137-1?
1936137-1 is cataloged in the U.S. Government catalog under NSN 3110-00-230-0501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1936137-1