PartsTable
Technical Data Sheet
Download PDF

192488PC2 — GEAR,WORM

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

192488PC2: GEAR,WORM.

The GEAR,WORM is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, face_type: STRAIGHT, bore_style: PLAIN BOTH ENDS, helix_angle: 31.1860 DEGREES, pitch_diameter: 0.5330 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-381-7316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
192488PC2
NSN: 3020-00-381-7316
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
face_typeSTRAIGHT
bore_stylePLAIN BOTH ENDS
helix_angle31.1860 DEGREES
pitch_diameter0.5330 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
special_featuresHUB HAS MOUNTING HOLE
style_designatorPROTRUDING HUB
face_nominal_width0.630 INCHES IN
hub_nominal_diameter0.420 INCHES FIRST END IN
hub_style_designatorSPLIT FIRST END
thread_form_quantity1
NSN3020-00-381-7316
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,WORM TITLE COMPONENT PN 192488PC2 MFR GEAR,WORM
KEY FEATURES
•
THREAD FORM DIRECTION: LEFT-HAND
•
BORE NOMINAL DIAMETER: 0.251 INCHES BOTH ENDS IN
•
HELIX ANGLE: 31.1860 DEGREES
•
HUB NOMINAL DIAMETER: 0.420 INCHES FIRST END IN
•
CLAMPING SURFACE NOMINAL LENGTH: 0.230 INCHES FIRST END IN
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.630 INCHES FIRST END IN
•
FACE TYPE: STRAIGHT
TECHNICAL CHARACTERISTICS
THREAD FORM DIRECTIONLEFT-HAND
BORE NOMINAL DIAMETER0.251 INCHES BOTH ENDS IN
HELIX ANGLE31.1860 DEGREES
HUB NOMINAL DIAMETER0.420 INCHES FIRST END IN
CLAMPING SURFACE NOMINAL LENGTH0.230 INCHES FIRST END IN
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.630 INCHES FIRST END IN
FACE TYPESTRAIGHT
STYLE DESIGNATORPROTRUDING HUB
PITCH DIAMETER0.5330 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
192488Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 192488PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 192488PC2?
192488PC2 is a GEAR,WORM.
What parts can replace 192488PC2?
There is 1 known substitute for 192488PC2: 192488. Substitute compatibility should be verified for your specific system.
What is the NSN for 192488PC2?
192488PC2 is cataloged in the U.S. Government catalog under NSN 3020-00-381-7316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 192488PC2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.