PartsTable
Technical Data Sheet
PartsTable / MRO / 19235-2
19235-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR IN, head_height: 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, shaft_length: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM SINGLE ACTUATOR IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-019-2352, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 19235-2
NSN: 5306-00-019-2352
FSC: 5306
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.215 INCHES MINIMUM AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR IN
head_height0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
shaft_length0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
pole_quantity4 EACH SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
overall_length2.102 INCHES NOMINAL IN
shaft_diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
NSN5306-00-019-2352
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 19235-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: UNFINISHED HEAD
•
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
THREAD LENGTH: 0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDUNFINISHED HEAD
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
NOMINAL THREAD DIAMETER0.312 INCHES IN
THREAD LENGTH0.437 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
THREAD QUANTITY PER INCH24
HEAD HEIGHT0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
19235-1Interchangeable
interchangeable cross-reference
interchangeable
19235-2Interchangeable
interchangeable cross-reference
interchangeable
71BS30-04-4-03NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19235-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19235-2?
19235-2 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 19235-2?
There are 3 known substitutes for 19235-2: 19235-1, 19235-2, 71BS30-04-4-03N. Substitute compatibility should be verified for your specific system.
What is the NSN for 19235-2?
19235-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-019-2352. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19235-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026