PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 192314
192314 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: PLASTIC OVERALL, offset_height: 0.810 INCHES NOMINAL IN, overall_width: 2.880 INCHES NOMINAL IN, head_thickness: 1.060 INCHES NOMINAL IN, overall_length: 10.030 INCHES NOMINAL IN, inside_diameter: 2.120 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-981-7014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
192314
NSN: 5330-00-981-7014
FSC: 5330
CAGE: 67049 — YOUNG TOUCHSTONE COMPANY DIV YOUNG TOUCHSTONE (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
offset_height0.810 INCHES NOMINAL IN
overall_width2.880 INCHES NOMINAL IN
head_thickness1.060 INCHES NOMINAL IN
overall_length10.030 INCHES NOMINAL IN
inside_diameter2.120 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN
outside_diameter2.560 INCHES NOMINAL IN
special_featuresCUSHION MATERIAL SHALL BE RESISTANT TO HYDRAULIC FLUID PER MIL-H-5606 /PER AN8031-6 OR BAC 1521-242/
style_designatorDOUBLE OFFSET SINGLE HEAD
fastening_device_typeSELF-LOCKING HEXAGON NUT
wrenching_surface_size1.605 INCHES NOMINAL FIRST END IN
end_item_identification6115001181241,6115001181244,6115001181245
NSN5330-00-981-7014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 192314 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
10-3341-4Interchangeable
interchangeable cross-reference
interchangeable
1923-14Interchangeable
interchangeable cross-reference
interchangeable
10-3341Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 192314?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 192314?
192314 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Hama.
What parts can replace 192314?
There are 3 known substitutes for 192314: 10-3341-4, 1923-14, 10-3341. Substitute compatibility should be verified for your specific system.
What is the NSN for 192314?
192314 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-981-7014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 192314

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026