PartsTable
Technical Data Sheet
Download PDF

192275 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

192275: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_length: 0.750 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-019-2275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
192275
NSN: 5305-00-019-2275
FSC: 5305 — Screws
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 2340 OR STEEL COMP 3135 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8630 OR STEEL COMP 8740 OR STEEL OVERALL
head_styleFLAT CHAMFER
head_height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_length0.750 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-019-2275
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 192275 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-624,FS9440 FED SPEC 9TH MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
HEAD HEIGHT0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-624,FS9440 FED SPEC 9TH MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 11 STYLE
SUBSTITUTES & CROSS-REFERENCES 1
FFS86TYPEISTYLE11Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 192275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 192275?
192275 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 192275?
There is 1 known substitute for 192275: FFS86TYPEISTYLE11. Substitute compatibility should be verified for your specific system.
What is the NSN for 192275?
192275 is cataloged in the U.S. Government catalog under NSN 5305-00-019-2275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 192275

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.