PartsTable
Technical Data Sheet
Download PDF

192008 — GASKET

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

192008: GASKET.

The GASKET is a Hama industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.219 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.969 INCHES NOMINAL IN, bolt_circle_diameter: 1.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-285-3818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
192008
NSN: 5330-00-285-3818
FSC: 5330 — Packing and Gasket Materials
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.201 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.219 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.969 INCHES NOMINAL IN
bolt_hole_quantity3
bolt_circle_diameter1.875 INCHES NOMINAL IN
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.031 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-285-3818
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 192008 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.969 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.031 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.219 INCHES NOMINAL IN
APERTURE DIAMETER0.969 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
BOLT CIRCLE DIAMETER1.875 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1914201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 192008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 192008?
192008 is a GASKET manufactured by Hama.
What parts can replace 192008?
There is 1 known substitute for 192008: 1914201. Substitute compatibility should be verified for your specific system.
What is the NSN for 192008?
192008 is cataloged in the U.S. Government catalog under NSN 5330-00-285-3818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 192008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.