PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19197
19197 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Soft inner lining. Multiple viewing angles. Holes for buttons and camera.

Magnetic closure. . Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, body_length: 0.400 INCHES MAXIMUM IN, overall_width: 2.100 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED, inclosure_type: FULLY INCLOSED.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-7672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19197
NSN: 5330-00-037-7672
FSC: 5330
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialALUMINUM ALLOY 7075
body_length0.400 INCHES MAXIMUM IN
overall_width2.100 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
inclosure_typeFULLY INCLOSED
overall_height1.000 INCHES NOMINAL IN
first_tip_styleSQUARE END
hardness_rating60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
mounting_methodTERMINAL SINGLE GROUP
frequency_rating7.0 KILOHERTZ NOMINAL SINGLE COMPONENT
outside_diameter2.359 INCHES NOMINAL IN
NSN5330-00-037-7672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19197 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.625 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HARDNESS RATING: 60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
•
OUTSIDE DIAMETER: 2.359 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.625 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.156 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
HARDNESS RATING60.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
OUTSIDE DIAMETER2.359 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
20117Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
19197Interchangeable
interchangeable cross-reference
interchangeable
862085Interchangeable
interchangeable cross-reference
interchangeable
984850-2BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19197?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19197?
19197 is a SUPPORT,STRUCTURAL COMPONENT,AIR manufactured by Clementoni.
What parts can replace 19197?
There are 9 known substitutes for 19197: 20117, QQ-A-200/11, AMS-QQ-A-200/11 and 6 more. Substitute compatibility should be verified for your specific system.
Is 19197 still available?
19197 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19197

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026