PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19174
19174 ✓ Verified by PartsTable
Jumbo · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

METHYLPREDNISOLONE SODIUM SUCCIN. Key specifications include material: ALUMINUM ALLOY OVERALL, thickness: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN, cell_quantity: 12, hole_diameter: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, overall_width: 5.810 INCHES MAXIMUM IN, physical_form: POWDER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-474-3711, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19174
NSN: 5310-00-474-3711
FSC: 5310
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
cell_quantity12
hole_diameter0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
overall_width5.810 INCHES MAXIMUM IN
physical_formPOWDER
terminal_typeTHREADED POST
administrationINTRAMUSCULAR OR INTRAVENOUS
overall_height4.934 INCHES NOMINAL IN
overall_length13.160 INCHES MAXIMUM IN
overall_diameter0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
voltage_in_volts24.0
NSN5310-00-474-3711
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 19174 · Jumbo ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
62210Interchangeable
interchangeable cross-reference
interchangeable
19174Interchangeable
interchangeable cross-reference
interchangeable
NDC00009-0039-28Interchangeable
interchangeable cross-reference
interchangeable
6505NCM105135Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19174?
19174 is a METHYLPREDNISOLONE SODIUM SUCCIN manufactured by Jumbo.
What parts can replace 19174?
There are 4 known substitutes for 19174: 62210, 19174, NDC00009-0039-28 and 1 more. Substitute compatibility should be verified for your specific system.
Is 19174 still available?
19174 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19174

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026