PartsTable
Technical Data Sheet
Download PDF

1916211 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1916211: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM AND RUBBER OVERALL, hole_diameter: 0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.625 INCHES NOMINAL IN, overall_length: 1.625 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-202-3626, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1916211
NSN: 5330-00-202-3626
FSC: 5330 — Packing and Gasket Materials
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialALUMINUM AND RUBBER OVERALL
hole_diameter0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.625 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.188 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
cross-sectional_shape_styleFIBRE OR COMPOSITION WITH WIRE INSERT
outside_edge_to_bolt_hole_center_distance_along_width0.188 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.188 INCHES NOMINAL IN
NSN5330-00-202-3626
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1916211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: FIBRE OR COMPOSITION WITH WIRE INSERT
•
APERTURE DIAMETER: 1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH1.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFIBRE OR COMPOSITION WITH WIRE INSERT
OVERALL WIDTH1.625 INCHES NOMINAL IN
APERTURE DIAMETER1.375 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
XA767Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 1916211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1916211?
1916211 is a GASKET.
What parts can replace 1916211?
There is 1 known substitute for 1916211: XA767. Substitute compatibility should be verified for your specific system.
What is the NSN for 1916211?
1916211 is cataloged in the U.S. Government catalog under NSN 5330-00-202-3626. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1916211

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.