19149 — SHIELD,COMPASS
✓ Government record, cited
Jumbo · MRO · MRO_GENERAL
PRODUCT OVERVIEW
19149: SHIELD,COMPASS.
It's Christmas Day and Santa's friends and family have gathered for lunch. Who is cooking? Who is not staying for lunch?
Try to imagine you are the snowman at the window. What he can see is the picture you have to puzzle. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-364-7005, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
MRO →
MRO_GENERAL →
19149
NSN: 5330-00-364-7005 NIINs: 003647005 , 012521543 FSC: 5330 — Packing and Gasket MaterialsCAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
material PAPER OVERALL hole_diameter 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 2.375 INCHES NOMINAL IN style_designator NON-CIRCULAR aperture_diameter 0.875 INCHES NOMINAL IN bolt_hole_quantity 2 bolt_circle_diameter 1.812 INCHES NOMINAL IN outside_corner_radius 0.281 INCHES NOMINAL IN cross-sectional_thickness 0.031 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION side_radius_from_gasket_center 0.719 INCHES NOMINAL IN NSN 5330-00-364-7005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 19149
MFR: Jumbo
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• SIDE RADIUS FROM GASKET CENTER: 0.719 INCHES NOMINAL IN
• STYLE DESIGNATOR: NON-CIRCULAR
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
• BOLT CIRCLE DIAMETER: 1.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN SIDE RADIUS FROM GASKET CENTER 0.719 INCHES NOMINAL IN STYLE DESIGNATOR NON-CIRCULAR CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION OVERALL WIDTH 2.375 INCHES NOMINAL IN APERTURE DIAMETER 0.875 INCHES NOMINAL IN BOLT HOLE QUANTITY 2 BOLT CIRCLE DIAMETER 1.812 INCHES NOMINAL IN OUTSIDE CORNER RADIUS 0.281 INCHES NOMINAL IN MATERIAL PAPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
A5791 Reference document Same NSN cross-reference
Reference document — Secondary reference
5245672 Reference document Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN status Cancelled · U.S. Government catalog
Acquisition advice: Semi-active item — no replacement planned No demilitarization required
Ready to buy 19149?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19149?
19149 is a SHIELD,COMPASS manufactured by Jumbo. It is classified as a MRO (MRO_GENERAL).
What parts can replace 19149?
There are 2 known substitutes for 19149: A5791, 5245672. Substitute compatibility should be verified for your specific system.
What is the NSN for 19149?
19149 is cataloged in the U.S. Government catalog under NSN 5330-00-364-7005. This indicates validated use in U.S. government and defense supply chains.