PartsTable
Technical Data Sheet
Download PDF

19138-19283 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

19138-19283: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.5625 INCHES NOMINAL IN, cone_width: 0.6504 INCHES NOMINAL IN, bore_diameter: 1.3770 INCHES NOMINAL IN, overall_width: 0.6700 INCHES NOMINAL IN, standout_width: 0.1075 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19138-19283
NSN: 3110-00-100-5296
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.5625 INCHES NOMINAL IN
cone_width0.6504 INCHES NOMINAL IN
bore_diameter1.3770 INCHES NOMINAL IN
overall_width0.6700 INCHES NOMINAL IN
standout_width0.1075 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter2.8345 INCHES NOMINAL IN
nondefinitive_spec/std_data751 TYPE
NSN3110-00-100-5296
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 19138-19283 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.8345 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 751 TYPE
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1075 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.5625 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.6700 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.8345 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA751 TYPE
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.1075 INCHES NOMINAL IN
CONE WIDTH0.6504 INCHES NOMINAL IN
BORE DIAMETER1.3770 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
FFB187TYPE751Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 19138-19283?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19138-19283?
19138-19283 is a BEARING,ROLLER,TAPERED.
What parts can replace 19138-19283?
There is 1 known substitute for 19138-19283: FFB187TYPE751. Substitute compatibility should be verified for your specific system.
What is the NSN for 19138-19283?
19138-19283 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19138-19283

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.