PartsTable
Technical Data Sheet
Download PDF

19135-3 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

19135-3: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: END ITEM APPLICATION HEMODIALYSIS UNIT; CAGE 61145; P/N REDY 2000, part_name_assigned_by_controlling_agency: TUBING HEMODIALYSIS END ITEM APPLICATION HEMODIALYSIS UNIT. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-585-7258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19135-3
NSN: 5330-00-585-7258
NIINs: 005857258, 013078486
FSC: 5330 — Packing and Gasket Materials
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
general_characteristics_item_descriptionEND ITEM APPLICATION HEMODIALYSIS UNIT; CAGE 61145; P/N REDY 2000
part_name_assigned_by_controlling_agencyTUBING HEMODIALYSIS END ITEM APPLICATION HEMODIALYSIS UNIT
NSN5330-00-585-7258
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19135-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: RADAR SET,AIRBORNE
•
CROSS-SECTIONAL THICKNESS: 0.185 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
PERIPHERAL DIAMETER: 0.562 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.272 INCHES MINIMUM AND 0.277 INCHES MAXIMUM IN
•
MATERIAL: TIN ALLOY OVERALL
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATARADAR SET,AIRBORNE
CROSS-SECTIONAL THICKNESS0.185 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
PERIPHERAL DIAMETER0.562 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.272 INCHES MINIMUM AND 0.277 INCHES MAXIMUM IN
MATERIALTIN ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
15182Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 19135-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19135-3?
19135-3 is a RETAINER,PACKING.
What parts can replace 19135-3?
There is 1 known substitute for 19135-3: 15182. Substitute compatibility should be verified for your specific system.
What is the NSN for 19135-3?
19135-3 is cataloged in the U.S. Government catalog under NSN 5330-00-585-7258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19135-3