PartsTable
Technical Data Sheet
PartsTable / O-RING / 19134-3-14
19134-3-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 2.137 INCHES NOMINAL IN, center_hole_diameter: 1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-796-4586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19134-3-14
NSN: 5331-00-796-4586
FSC: 5331 — O-RING
CAGE: 81412 — TREADWELL CORPORATION (DELAWARE) DBA TREADWELL CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter2.137 INCHES NOMINAL IN
center_hole_diameter1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-00-796-4586
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19134-3-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 2.137 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER2.137 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.841 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2-225 S613-60Interchangeable
interchangeable cross-reference
interchangeable
AS568-225Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-22050Interchangeable
interchangeable cross-reference
interchangeable
AS568B-225Interchangeable
interchangeable cross-reference
interchangeable
2-225-E688-70Interchangeable
interchangeable cross-reference
interchangeable
ARP568-225Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19134-3-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19134-3-14?
19134-3-14 is a O-RING.
What parts can replace 19134-3-14?
There are 13 known substitutes for 19134-3-14: 2-225 S613-60, AS568-225, MIL-DTL-22050 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19134-3-14?
19134-3-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-796-4586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19134-3-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026