PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1912CLB7
1912CLB7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 60.0 MILLIMETERS NOMINAL MM, overall_width: 13.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-926-1411, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1912CLB7
NSN: 3110-00-926-1411
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter60.0 MILLIMETERS NOMINAL MM
overall_width13.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
special_featuresBEARING FILLED 20 PCT W/SPECIFIED GREASE 10 PCT EACH SIDE; VENDOR SHALL COMPLY TO DWG 11700037-5 LATEST REVISION
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0004 INCHES MINIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter85.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
NSN3110-00-926-1411
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1912CLB7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
INTERNAL CLEARANCE: 0.0004 INCHES MINIMUM RADIAL IN
•
RETAINER FABRICATION METHOD: MACHINED
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
SPECIAL FEATURESBEARING FILLED 20 PCT W/SPECIFIED GREASE 10 PCT EACH SIDE; VENDOR SHALL COMPLY TO DWG 11700037-5 LATEST REVISION
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
INTERNAL CLEARANCE0.0004 INCHES MINIMUM RADIAL IN
RETAINER FABRICATION METHODMACHINED
STANDARD TOLERANCE DESIGNATIONABEC NO.7
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1912Interchangeable
interchangeable cross-reference
interchangeable
5120-00-009-8602Interchangeable
interchangeable cross-reference
interchangeable
A-A-2635Interchangeable
interchangeable cross-reference
interchangeable
2567526-2Interchangeable
interchangeable cross-reference
interchangeable
6912JInterchangeable
interchangeable cross-reference
interchangeable
1912SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1912CLB7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1912CLB7?
1912CLB7 is a BEARING,BALL,ANNULAR.
What parts can replace 1912CLB7?
There are 22 known substitutes for 1912CLB7: 1912, 5120-00-009-8602, A-A-2635 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1912CLB7?
1912CLB7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-926-1411. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1912CLB7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026