191250 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

191250: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 36.000 POUNDS MINIMUM AND 40.000 POUNDS MAXIMUM LBS, inside_diameter: 0.3482 INCHES NOMINAL IN, style_designator: CYLINDRICAL, spring_free_length: 1.203 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-324-8193, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

191250

NSN: 5360-00-324-8193
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 31361 — WOODWARD, INC. (USA)

SPECIFICATIONS

material	STEEL UNS K08500 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
load_rating	36.000 POUNDS MINIMUM AND 40.000 POUNDS MAXIMUM LBS
coil_quantity	9
inside_diameter	0.3482 INCHES NOMINAL IN
style_designator	CYLINDRICAL
spring_free_length	1.203 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN
spring_solid_length	0.234 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND
spring_length_under_load	0.234 INCHES NOMINAL IN
spring_free_outside_diameter	0.531 INCHES NOMINAL IN
spring_solid_outside_diameter	0.531 INCHES NOMINAL IN
NSN	5360-00-324-8193

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.531 INCHES NOMINAL IN

•

LOAD RATING: 36.000 POUNDS MINIMUM AND 40.000 POUNDS MAXIMUM LBS

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.234 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.203 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 0.3482 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.531 INCHES NOMINAL IN
LOAD RATING	36.000 POUNDS MINIMUM AND 40.000 POUNDS MAXIMUM LBS
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.234 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.203 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN
INSIDE DIAMETER	0.3482 INCHES NOMINAL IN
SPRING LENGTH UNDER LOAD	0.234 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	0.531 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

3216464Reference document

Same NSN cross-reference

Reference document — Secondary reference

250Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 191250?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 191250?

191250 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 191250?

There are 2 known substitutes for 191250: 3216464, 250. Substitute compatibility should be verified for your specific system.

What is the NSN for 191250?

191250 is cataloged in the U.S. Government catalog under NSN 5360-00-324-8193. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

191250 — SPRING,HELICAL,COMPRESSION

Request a Quote — 191250