PartsTable
Technical Data Sheet
191139 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,CERAMIC DIELE. Key specifications include height: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, shank_length: 0.281 INCHES NOMINAL IN, special_features: THROAT LOCATED BALL CHECK VALVE, style_designator: STRAIGHT, W/CAP, surface_treatment: CADMIUM OR ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-071-2256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
191139
NSN: 5330-00-071-2256
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
height1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
shank_length0.281 INCHES NOMINAL IN
special_featuresTHROAT LOCATED BALL CHECK VALVE
style_designatorSTRAIGHT, W/CAP
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.125 INCHES IN
thread_quantity_per_inch27
screw_thread_series_designatorPTF-SPL EXTRA SHORT
NSN5330-00-071-2256
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 191139 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
CASE STYLE: RECESSED
SEALING ELEMENT STYLE: ANGULAR
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
MATERIAL: STEEL CASE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
CASE STYLERECESSED
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
191139Interchangeable
interchangeable cross-reference
interchangeable
S372-1004P1Interchangeable
interchangeable cross-reference
interchangeable
19175CAInterchangeable
interchangeable cross-reference
interchangeable
8486867Interchangeable
interchangeable cross-reference
interchangeable
21364-1203Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 191139?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 191139?
191139 is a CAPACITOR,VARIABLE,CERAMIC DIELE.
What parts can replace 191139?
There are 5 known substitutes for 191139: 191139, S372-1004P1, 19175CA and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 191139?
191139 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-071-2256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 191139