PartsTable
Technical Data Sheet
Download PDF

191135 — FITTING,LUBRICATION

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

191135: FITTING,LUBRICATION.

The FITTING,LUBRICATION is a the manufacturer industrial component. Key specifications include height: 0.078 INCHES NOMINAL IN, diameter: 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN, material: STEEL COMP 416F OVERALL, head_style: FLAT FILLISTER, shank_length: 0.344 INCHES NOMINAL IN, undercut_width: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-223-6416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
191135
NSN: 4730-00-223-6416
NIINs: 002236416, 002982092
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
height0.078 INCHES NOMINAL IN
diameter0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN
materialSTEEL COMP 416F OVERALL
head_styleFLAT FILLISTER
shank_length0.344 INCHES NOMINAL IN
undercut_width0.031 INCHES NOMINAL IN
effective_length0.633 INCHES NOMINAL IN
style_designatorGROOVE
pin_head_diameter0.218 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.734 INCHES NOMINAL IN
undercut_diameter0.1140 INCHES MINIMUM AND 0.1145 INCHES MAXIMUM IN
NSN4730-00-223-6416
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 191135 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
SHANK LENGTH: 0.344 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
HEIGHT: 0.750 INCHES NOMINAL IN
•
SCREW THREAD SERIES DESIGNATOR: PTF-SPL SHORT
•
SURFACE TREATMENT: CADMIUM AND ZINC OVERALL
•
THREAD QUANTITY PER INCH: 27
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
SHANK LENGTH0.344 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
NOMINAL THREAD SIZE0.125 INCHES IN
HEIGHT0.750 INCHES NOMINAL IN
SCREW THREAD SERIES DESIGNATORPTF-SPL SHORT
SURFACE TREATMENTCADMIUM AND ZINC OVERALL
THREAD QUANTITY PER INCH27
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
N1568Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1184Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
329650P01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S4023Reference document
Same NSN cross-reference
Reference document — Secondary reference
1094K49Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 191135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 191135?
191135 is a FITTING,LUBRICATION.
What parts can replace 191135?
There are 5 known substitutes for 191135: N1568, A1184, 329650P01 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 191135?
191135 is cataloged in the U.S. Government catalog under NSN 4730-00-223-6416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 191135

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.