PartsTable
Technical Data Sheet
Download PDF

1910SF — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1910SF: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 50.00 MILLIMETERS NOMINAL MM, overall_width: 12.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-920-2472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1910SF
NSN: 3110-00-920-2472
NIINs: 009202472, 016009371
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter50.00 MILLIMETERS NOMINAL MM
overall_width12.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.3
NSN3110-00-920-2472
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1910SF · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH12.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.3
SUBSTITUTES & CROSS-REFERENCES 1
195885Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1910SF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1910SF?
1910SF is a BEARING,BALL,ANNULAR.
What parts can replace 1910SF?
There is 1 known substitute for 1910SF: 195885. Substitute compatibility should be verified for your specific system.
What is the NSN for 1910SF?
1910SF is cataloged in the U.S. Government catalog under NSN 3110-00-920-2472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1910SF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.