PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19101-3
19101-3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,ACTUATING,LINE. Key specifications include material: STEEL COMP 8630 OVERALL, thickness: 0.093 INCHES NOMINAL IN, bore_diameter: 0.5000 INCHES NOMINAL IN, hole_diameter: 0.448 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3093, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19101-3
NSN: 3110-00-120-3093
FSC: 3110
CAGE: 82471 — LENARD PACKAGING CO INC THE (USA)
SPECIFICATIONS
materialSTEEL COMP 8630 OVERALL
thickness0.093 INCHES NOMINAL IN
bore_diameter0.5000 INCHES NOMINAL IN
hole_diameter0.448 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
hardness_rating35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
overall_diameter1.125 INCHES NOMINAL IN
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
NSN3110-00-120-3093
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 19101-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
BORE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.7500 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
989096-1CInterchangeable
interchangeable cross-reference
interchangeable
16364Interchangeable
interchangeable cross-reference
interchangeable
67906-02Interchangeable
interchangeable cross-reference
interchangeable
25636-51051Interchangeable
interchangeable cross-reference
interchangeable
51051Interchangeable
interchangeable cross-reference
interchangeable
SS51051K2220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19101-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19101-3?
19101-3 is a CYLINDER ASSEMBLY,ACTUATING,LINE.
What parts can replace 19101-3?
There are 32 known substitutes for 19101-3: 989096-1C, 16364, 67906-02 and 29 more. Substitute compatibility should be verified for your specific system.
Is 19101-3 still available?
19101-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19101-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026