PartsTable
Technical Data Sheet
Download PDF

19085-1 — TERMINAL,DATA PROCESSING

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

19085-1: TERMINAL,DATA PROCESSING.

The TERMINAL,DATA PROCESSING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL, rim_surface_width: 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL, peripheral_diameter: 4.950 INCHES NOMINAL IN, center_hole_diameter: 4.264 INCHES MINIMUM AND 4.268 INCHES MAXIMUM IN, cross-sectional_height: 0.335 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-012-2791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 19085-1
NSN: 5330-01-012-2791
NIINs: 010122791, 015890388
FSC: 5330 — Packing and Gasket Materials
CAGE: 02121 — GOODRICH AEROSPACE CANADA LTD (CAN)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL
rim_surface_width0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
peripheral_diameter4.950 INCHES NOMINAL IN
center_hole_diameter4.264 INCHES MINIMUM AND 4.268 INCHES MAXIMUM IN
cross-sectional_height0.335 INCHES NOMINAL IN
cross-sectional_thickness0.174 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
flanged_body_outside_diameter4.616 INCHES MINIMUM AND 4.618 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/12 ALLOY 7075 T7351 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/4 ALLOY 2014 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-01-012-2791
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 19085-1 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 19085-1 MFR OEM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.174 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.335 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/12 ALLOY 7075 T7351 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/4 ALLOY 2014 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
RIM SURFACE WIDTH: 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FLANGED BODY OUTSIDE DIAMETER: 4.616 INCHES MINIMUM AND 4.618 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 4.950 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.174 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.335 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/12 ALLOY 7075 T7351 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/4 ALLOY 2014 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
RIM SURFACE WIDTH0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FLANGED BODY OUTSIDE DIAMETER4.616 INCHES MINIMUM AND 4.618 INCHES MAXIMUM IN
PERIPHERAL DIAMETER4.950 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
CENTER HOLE DIAMETER4.264 INCHES MINIMUM AND 4.268 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 19085-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19085-1?
19085-1 is a TERMINAL,DATA PROCESSING. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What is the NSN for 19085-1?
19085-1 is cataloged in the U.S. Government catalog under NSN 5330-01-012-2791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19085-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.