PartsTable
Technical Data Sheet

1905-30GC-1 S/N — VALVE,SAFETY RELIEF

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

1905-30GC-1 S/N: VALVE,SAFETY RELIEF.

The VALVE,SAFETY RELIEF is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 FLOW CONTROL DEVICE, valve_size: 2.500 INCHES IN, bonnet_type: INSIDE SPRING, flange_shape: ROUND WITH HOLES FIRST END, connection_type: FLANGE SECOND END, style_designator: ANGLE FLANGED ENDS. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-334-1374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1905-30GC-1 S/N
NSN: 4820-01-334-1374
FSC: 4820 — Valves, Nonpowered
CAGE: 16497 — DRESSER, INC. DBA DRESSER EQUIPMENT GROUP DIV INDUSTRIAL VALVE OPERATIONS, DRESSE (USA)
SPECIFICATIONS
materialSTEEL COMP 316 FLOW CONTROL DEVICE
valve_size2.500 INCHES IN
bonnet_typeINSIDE SPRING
flange_shapeROUND WITH HOLES FIRST END
connection_typeFLANGE SECOND END
style_designatorANGLE FLANGED ENDS
nominal_thickness0.563 INCHES SECOND END IN
bolt_hole_quantity4 SECOND END
flange_face_designRAISED STRAIGHT FIRST END
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_deviceDISK
NSN4820-01-334-1374
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 1905-30GC-1 S/N · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES FIRST END
•
FLANGE FACE DESIGN: RAISED STRAIGHT SECOND END
•
BOLT CIRCLE NOMINAL DIAMETER: 3.875 INCHES SECOND END IN
•
CONNECTION TYPE: FLANGE SECOND END
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES FIRST END
FLANGE SHAPEROUND WITH HOLES SECOND END
FLANGE FACE DESIGNRAISED STRAIGHT SECOND END
FLANGE FACE DESIGNRAISED STRAIGHT FIRST END
BOLT CIRCLE NOMINAL DIAMETER3.875 INCHES SECOND END IN
BOLT CIRCLE NOMINAL DIAMETER5.500 INCHES FIRST END IN
CONNECTION TYPEFLANGE SECOND END
CONNECTION TYPEFLANGE FIRST END
STYLE DESIGNATORANGLE FLANGED ENDS
SUBSTITUTES & CROSS-REFERENCES 2
315223Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
PL315223 ASSY 1905-30GC-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1905-30GC-1 S/N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1905-30GC-1 S/N?
1905-30GC-1 S/N is a VALVE,SAFETY RELIEF.
What parts can replace 1905-30GC-1 S/N?
There are 2 known substitutes for 1905-30GC-1 S/N: 315223, PL315223 ASSY 1905-30GC-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 1905-30GC-1 S/N?
1905-30GC-1 S/N is cataloged in the U.S. Government catalog under NSN 4820-01-334-1374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1905-30GC-1 S/N