PartsTable
Technical Data Sheet
Download PDF

19045 POS 68 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

19045 POS 68: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, outside_diameter: 68.0 MILLIMETERS NOMINAL MM, special_features: DIN 7603 AL-KER.FA, style_designator: CIRCULAR, aperture_diameter: 60.0 MILLIMETERS NOMINAL MM, end_item_identification: FILTER, BACKFLOW. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-522-2806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19045 POS 68
NSN: 5330-01-522-2806
FSC: 5330 — Packing and Gasket Materials
CAGE: 3EXK7 — BOLL FILTER CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
outside_diameter68.0 MILLIMETERS NOMINAL MM
special_featuresDIN 7603 AL-KER.FA
style_designatorCIRCULAR
aperture_diameter60.0 MILLIMETERS NOMINAL MM
end_item_identificationFILTER, BACKFLOW
cross-sectional_thickness3.0 MILLIMETERS NOMINAL MM
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-522-2806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19045 POS 68 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 3.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 68.0 MILLIMETERS NOMINAL MM
•
APERTURE DIAMETER: 60.0 MILLIMETERS NOMINAL MM
•
MATERIAL: ALUMINUM OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS3.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER68.0 MILLIMETERS NOMINAL MM
APERTURE DIAMETER60.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURESDIN 7603 AL-KER.FA
END ITEM IDENTIFICATIONFILTER, BACKFLOW
MATERIALALUMINUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
Z42564 POS 68Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 19045 POS 68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19045 POS 68?
19045 POS 68 is a GASKET.
What parts can replace 19045 POS 68?
There is 1 known substitute for 19045 POS 68: Z42564 POS 68. Substitute compatibility should be verified for your specific system.
What is the NSN for 19045 POS 68?
19045 POS 68 is cataloged in the U.S. Government catalog under NSN 5330-01-522-2806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19045 POS 68