PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1901-16
1901-16 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include end_item_identification: FORD MOTOR CO SERIES 600/900 TRUCK, sector_shaft_mounting_end_serrated_bore: INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-830-1562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1901-16
NSN: 5305-00-830-1562
FSC: 5305
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
end_item_identificationFORD MOTOR CO SERIES 600/900 TRUCK
sector_shaft_mounting_end_serrated_boreINCLUDED
NSN5305-00-830-1562
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1901-16 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT CHAMFER
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: STEEL OVERALL
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: HEXAGON
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT CHAMFER
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL OVERALL
THREAD CLASS2A A
FASTENER LENGTH1.125 INCHES NOMINAL IN
INTERNAL DRIVE STYLEHEXAGON
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD LENGTH0.781 INCHES MINIMUM IN
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1901-10Interchangeable
interchangeable cross-reference
interchangeable
1901-16Interchangeable
interchangeable cross-reference
interchangeable
30249Interchangeable
interchangeable cross-reference
interchangeable
EOTZ3590-BInterchangeable
interchangeable cross-reference
interchangeable
E2TZ3590-CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1901-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1901-16?
1901-16 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace 1901-16?
There are 5 known substitutes for 1901-16: 1901-10, 1901-16, 30249 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1901-16?
1901-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-830-1562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1901-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026