The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, overall_length: 1.675 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), features_provided: HERMETICALLY SEALED CASE, nominal_thread_size: 0.375 INCHES IN, thread_series_designator: UNF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-950-6570, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | SILICON SEMICONDUCTOR |
| overall_length | 1.675 INCHES MAXIMUM IN |
| mounting_method | THREADED STUD(S) |
| features_provided | HERMETICALLY SEALED CASE |
| nominal_thread_size | 0.375 INCHES IN |
| thread_series_designator | UNF |
| mounting_facility_quantity | 1 |
| overall_width_across_flats | 1.031 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN |
| terminal_type_and_quantity | 1 TAB, SOLDER LUG AND 1 THREADED STUD |
| specification/standard_data | 81349-MIL-PRF-19500/246 GOVERNMENT SPECIFICATION |
| current_rating_per_characteristic | 75.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |
| voltage_rating_in_volts_per_characteristic | 240.0 MAXIMUM REVERSE VOLTAGE, PEAK |
| NSN | 5961-00-950-6570 |
| TEST DATA DOCUMENT | 81349-MIL-PRF-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MATERIAL | SILICON SEMICONDUCTOR |
| TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND 1 THREADED STUD |
| SPECIFICATION/STANDARD DATA | 81349-MIL-PRF-19500/246 GOVERNMENT SPECIFICATION |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 200.0 CELSIUS CASE DEGC |
| OVERALL WIDTH ACROSS FLATS | 1.031 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN |
| MOUNTING FACILITY QUANTITY | 1 |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 240.0 MAXIMUM REVERSE VOLTAGE, PEAK |
| NOMINAL THREAD SIZE | 0.375 INCHES IN |
| CURRENT RATING PER CHARACTERISTIC | 75.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE |