PartsTable
Technical Data Sheet
Download PDF

190018-3 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

190018-3: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: SLEEVE, nut_length: 0.098 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, nut_diameter: 0.156 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-757-3916, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
190018-3
NSN: 5310-00-757-3916
FSC: 5310 — Nuts and Washers
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleSLEEVE
nut_length0.098 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
nut_diameter0.156 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_thickness0.047 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.112 INCHES IN
cross-sectional_shapeHEXAGONAL FLANGE
thread_quantity_per_inch40
NSN5310-00-757-3916
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 190018-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
NUT LENGTH: 0.098 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FLANGE THICKNESS: 0.047 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
NUT LENGTH0.098 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FLANGE THICKNESS0.047 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.156 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 190018-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 190018-3?
190018-3 is a NUT,SLEEVE.
What is the NSN for 190018-3?
190018-3 is cataloged in the U.S. Government catalog under NSN 5310-00-757-3916. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 190018-3