PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 190-5130
190-5130 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, hole_diameter: 0.436 INCHES NOMINAL IN, overall_length: 0.375 INCHES NOMINAL IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM IN, outside_diameter: 2.190 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-226-3586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
190-5130
NSN: 5310-00-226-3586
FSC: 5310
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialGLASS ENCLOSURE
hole_diameter0.436 INCHES NOMINAL IN
overall_length0.375 INCHES NOMINAL IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM IN
outside_diameter2.190 INCHES NOMINAL IN
overall_diameter0.200 INCHES NOMINAL IN
style_designatorCONVEX
features_providedHERMETICALLY SEALED CASE
material_thickness0.430 INCHES NOMINAL IN
end_item_identificationCATERPILLAR 428D, LOADER/BACKHOE
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
NSN5310-00-226-3586
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 190-5130 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.436 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.430 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.190 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CONVEX
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.436 INCHES NOMINAL IN
MATERIAL THICKNESS0.430 INCHES NOMINAL IN
OUTSIDE DIAMETER2.190 INCHES NOMINAL IN
STYLE DESIGNATORCONVEX
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
190-51-30Interchangeable
interchangeable cross-reference
interchangeable
D172Interchangeable
interchangeable cross-reference
interchangeable
11065563-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 190-5130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 190-5130?
190-5130 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 190-5130?
There are 3 known substitutes for 190-5130: 190-51-30, D172, 11065563-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 190-5130?
190-5130 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-226-3586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 190-5130

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026