PartsTable
Technical Data Sheet
Download PDF

19-660-377-00PC037 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

19-660-377-00PC037: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 46.875 INCHES NOMINAL IN, cross-sectional_height: 0.267 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-087-6750, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19-660-377-00PC037
NSN: 5331-00-087-6750
FSC: 5331 — O-ring
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter46.875 INCHES NOMINAL IN
cross-sectional_height0.267 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
NSN5331-00-087-6750
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19-660-377-00PC037 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.267 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 46.875 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.267 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
CENTER HOLE DIAMETER46.875 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 3
MIL-G-21610 TYPE 1Reference document
Same NSN cross-reference
Reference document — Identification reference
19-660-377-00-037Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
19-660-377PC37Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 19-660-377-00PC037?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19-660-377-00PC037?
19-660-377-00PC037 is a O-RING.
What parts can replace 19-660-377-00PC037?
There are 3 known substitutes for 19-660-377-00PC037: MIL-G-21610 TYPE 1, 19-660-377-00-037, 19-660-377PC37. Substitute compatibility should be verified for your specific system.
What is the NSN for 19-660-377-00PC037?
19-660-377-00PC037 is cataloged in the U.S. Government catalog under NSN 5331-00-087-6750. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19-660-377-00PC037